Help & Advice
Below you will find some useful information and our pricing of course!!
Simply click the appropriate link below.
How to measure
Hanging finished Roman Blinds
Pricing
| How to measure | |
 |
If you want your blind to be fitted OUTSIDE the recess then: 1. Measure the width of the actual recess plus an additional amount - between 5-10cm (2" - 4") whatever you think looks right 2. Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add some to the drop - usually 15-20cm (6" - 8") These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size to allow for turnings. Our website will automatically calculate the required size when you order. |
 |
If you want your blind to be fitted INSIDE the recess then: 1. Measure the exact width of the recess in three places - at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size 2. Measure the exact drop of the recess - again in three places - on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size. We will make the blind approx 1.5cm smaller than the size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size to allow for turnings.. |
| Hanging finished Roman Blinds | |
 |
|
| 1. Mark and fix the Supports in position, making sure that the supports fall in position between the cord guides. 2. Clip the support rail onto the supports by resting the rail onto position A and press back. To remove the rail depress and release catch B. 3. Cut any excess cord from cord pull supplied Using The Cord Lock |
|